AutoTipPro

Fix It Pro is a popular solution for minor scratches and scuffs on car paint, but can it be used on motorcycles? Absolutely! This guide explores how to effectively use Fix It Pro on your motorcycle, ensuring a professional-looking finish and protecting your bike’s appearance.

Understanding Fix It Pro and Its Applications on Motorcycles

Fix It Pro is a filling and sealant pen designed to mask minor paint imperfections. It works by filling in scratches and then sealing the area to prevent further damage. While often associated with cars, it’s equally effective on motorcycles, addressing those inevitable scrapes from road debris or minor parking lot mishaps. Using Fix It Pro on your motorcycle can save you money on costly professional repairs while keeping your bike looking its best.

Preparing Your Motorcycle for Fix It Pro Application

Before applying Fix It Pro, proper preparation is crucial for achieving optimal results. Thoroughly clean the scratched area with soap and water, then dry it completely. This removes any dirt or debris that could interfere with the sealant’s bonding. For stubborn grime, consider using a dedicated automotive cleaning solution. Next, inspect the scratch carefully. If there’s any loose paint or rust, gently remove it with fine-grit sandpaper. A clean and smooth surface is key for a seamless Fix It Pro application.

Step-by-Step Guide to Using Fix It Pro on Your Motorcycle

1. Clean the area: As mentioned earlier, ensure the scratched area is completely clean and dry.
2. Shake the pen: Vigorously shake the Fix It Pro pen for at least 30 seconds to ensure the compound is properly mixed.
3. Apply the sealant: Gently press the tip of the pen onto the scratch, allowing the clear compound to flow into the crevice. Apply thin, even coats, avoiding excessive buildup.
4. Remove excess sealant: Use a clean, soft cloth to wipe away any excess sealant immediately. Work quickly as the compound dries relatively fast.
5. Allow to dry: Let the treated area dry completely. Avoid touching or exposing it to moisture during the drying process, which typically takes a few minutes.
6. Buff to a shine (optional): For a truly polished finish, use a microfiber cloth to gently buff the dried sealant. This will blend the repaired area seamlessly with the surrounding paint.

Tips for Achieving a Professional Finish with Fix It Pro

• Work in a shaded area: Avoid applying Fix It Pro in direct sunlight, as this can accelerate the drying process and make it difficult to achieve an even application.
• Multiple thin coats are better than one thick coat: Applying multiple thin coats allows the sealant to dry properly and prevents clumping.
• Patience is key: Don’t rush the process. Take your time to ensure proper application and drying for the best results.

“Using Fix It Pro correctly can significantly improve the appearance of minor scratches on your motorcycle. Remember, preparation is paramount for a professional-looking finish,” advises John Miller, a veteran motorcycle mechanic with over 20 years of experience.

Troubleshooting Common Fix It Pro Application Issues

What if the scratch is too deep? Fix It Pro is designed for minor scratches and scuffs. For deeper damage, professional repair might be necessary. However, Fix It Pro can still be used to minimize the appearance of the scratch and prevent further deterioration.

Conclusion

Fix It Pro offers a convenient and cost-effective solution for addressing minor scratches on your motorcycle. By following the steps outlined in this guide, you can achieve a professional-looking finish and keep your bike looking its best. Remember, proper preparation and patience are key to successful Fix It Pro application. For further assistance or personalized advice, connect with the experts at AutoTipPro. Call us at +1 (641) 206-8880 or visit our office at 500 N St Mary’s St, San Antonio, TX 78205, United States.

FAQ

1. How long does Fix It Pro last on a motorcycle?
   The longevity of Fix It Pro depends on various factors, including weather conditions and frequency of washing. Typically, it lasts for several months.

2. Can I use Fix It Pro on any motorcycle color?
   Yes, Fix It Pro is designed to blend with various paint colors.

3. Is Fix It Pro resistant to water and UV rays?
   Fix It Pro offers a degree of water and UV resistance, helping protect the treated area from further damage.

4. Can I apply multiple coats of Fix It Pro?
   Yes, applying multiple thin coats is recommended for optimal results.

5. What should I do if I accidentally apply too much Fix It Pro?
   Quickly wipe away the excess sealant with a clean, soft cloth before it dries.

6. Where can I purchase Fix It Pro?
   Fix It Pro is readily available online and in many automotive stores.

7. Is Fix It Pro a permanent solution for scratches?
   Fix It Pro is a temporary solution for minor scratches and scuffs. Deeper damage may require professional repair.