AutoTipPro

Fix It Pro is a popular solution for minor car scratches and chips. This guide provides detailed instructions on how to effectively use Fix It Pro, ensuring a professional-looking finish and saving you costly trips to the body shop. We’ll cover everything from surface preparation to application techniques and aftercare.

Understanding Fix It Pro and Its Applications

Fix It Pro is designed to fill in minor scratches and chips, not deep gouges or dents. It works by filling the scratch with a resin that levels with the surrounding paint, then dries to a hard, clear finish. This makes it ideal for those annoying superficial blemishes that detract from your car’s appearance.

When to Use Fix It Pro

• Light scratches: Perfect for those hairline scratches caused by keys, branches, or minor collisions.
• Stone chips: Effective in filling small chips caused by road debris.
• Scuff marks: Can help minimize the appearance of scuffs on bumpers or door panels.

When Not to Use Fix It Pro

• Deep dents or gouges: Fix It Pro is not designed for significant body damage.
• Rust repair: It’s not a rust inhibitor or remover. Address rust issues before using Fix It Pro.
• Cracked paint: Fix It Pro works best on intact paint surfaces.

Preparing Your Car for Fix It Pro Application

Proper surface preparation is crucial for achieving optimal results. A clean, dry surface allows the Fix It Pro resin to adhere properly and ensures a smooth, even finish.

1. Wash the area: Thoroughly wash the scratched area with soap and water to remove dirt and grime.
2. Dry completely: Ensure the area is completely dry before proceeding. Use a clean microfiber towel to prevent introducing new scratches.
3. Clean with rubbing alcohol: Use rubbing alcohol to remove any remaining wax or residue. This will create a pristine surface for the Fix It Pro resin.

Applying Fix It Pro: A Step-by-Step Guide

Applying Fix It Pro is a straightforward process, but attention to detail is key for a professional-looking result.

1. Shake the pen: Shake the Fix It Pro pen vigorously for at least 30 seconds to mix the resin thoroughly.
2. Prime the pen: Press the tip repeatedly on a piece of cardboard or paper until the resin flows smoothly.
3. Apply the resin: Apply a thin, even coat of resin to the scratch, slightly overlapping the surrounding area.
4. Remove excess resin: Use a clean, dry cloth to remove any excess resin immediately.
5. Let it dry: Allow the resin to dry completely in direct sunlight for a few minutes.
6. Buff the area (if necessary): If any excess resin remains after drying, use a fine-grit sandpaper or polishing compound to smooth the area.

Tips for a Flawless Finish with Fix It Pro

• Apply multiple thin coats: For deeper scratches, apply multiple thin coats, allowing each coat to dry before applying the next.
• Work in a shaded area if possible: Direct sunlight can accelerate drying, making it harder to work with the resin.
• Practice on a less visible area: If you’re unsure about the application process, practice on a less conspicuous area of your car first.

“Fix It Pro is a great tool for addressing minor paint imperfections,” says automotive expert, David Miller, ASE Certified Master Technician. “It’s a cost-effective and easy-to-use solution for maintaining your car’s appearance.” Another expert, Sarah Johnson, an automotive paint specialist, adds, “Remember, preparation is key. A clean surface will ensure a professional-looking result.”

Conclusion

Using Fix It Pro correctly can significantly improve your car’s appearance by effectively addressing minor scratches and chips. By following these simple steps and tips, you can achieve professional-looking results at a fraction of the cost of a professional repair. For further assistance or advice, connect with AutoTipPro at +1 (641) 206-8880 or visit our office at 500 N St Mary’s St, San Antonio, TX 78205, United States.

FAQ

1. How long does Fix It Pro last? The durability of Fix It Pro depends on environmental factors and car usage. It can last for several months or even years.
2. Can I use Fix It Pro on any car color? Yes, Fix It Pro is designed to blend with any car color.
3. Is Fix It Pro permanent? While durable, Fix It Pro is not a permanent fix. It may require reapplication over time.
4. Can I wash my car after applying Fix It Pro? Yes, you can wash your car after the resin has dried completely.
5. What if I make a mistake during application? You can remove excess or improperly applied resin with rubbing alcohol before it dries.
6. Where can I buy Fix It Pro? Fix It Pro is available online and at many auto parts stores.
7. Is Fix It Pro safe for my car’s paint? Yes, Fix It Pro is formulated to be safe for car paint.